The Over-Flow Ultraviolet + Ozone Combined Sterilizer is a cutting-edge device that provides effective, all-round disinfection for pools, water treatment systems, and other applications. By combining the destructive power of ultraviolet (UV) light and ozone, this system achieves unmatched sterilization and purification. The UV component targets and destroys the DNA and RNA of microorganisms, while ozone delivers strong oxidation to eliminate bacteria and harmful organic substances without producing unwanted by-products.
Dual-Action Sterilization
The combination of UV and ozone technologies creates a robust disinfection system. UV light effectively destroys microbial DNA and RNA, preventing their replication, while ozone penetrates bacterial enzymes to disrupt metabolism, ensuring complete eradication of contaminants.
Low-Cost, Safe, and Efficient
This sterilizer is cost-effective, requiring only electricity for operation and no additional consumables. It is equipped with a fully sealed, waterproof driver that prevents electrical hazards, ensuring safe and reliable performance in all conditions.
Durable and Reliable Design
The sterilizer’s stainless steel body provides superior durability and corrosion resistance. Its robust construction makes it ideal for long-term use in demanding environments.
Technical Specifications
Model | Input Voltage | Ozone Output | Length | Water Treatment Volume | Operating Pressure |
---|---|---|---|---|---|
GC34015 | AC230V 50Hz | 50mg/hr | 450mm | 0.5M³/Hr | 0.4Mpa |
GC44069 | AC230V 50Hz | 100mg/hr | 580mm | 1.3M³/Hr | 0.4Mpa |
GC44120 | AC230V 50Hz | 150mg/hr | 703mm | 1.8M³/Hr | 0.4Mpa |
GC62180 | AC230V 50Hz | 200mg/hr | 1005mm | 2.7M³/Hr | 0.4Mpa |
Installation Instructions
- The nominal diameter of the sterilizer interface is 3/4″ for internal connection and Ø20 for external connection.
- Before installation, close the pipeline valve and clean any oil stains or dust at the installation nozzle.
- Ensure the hose seal is secure with a throat band during connection.
- Connect the power supply to AC230V 50/60Hz and securely attach the grounding wire.
- Keep the operating temperature below 90°C and avoid freezing water in the sterilizer.
- The blue indicator light signals normal operation, while the red light indicates a fault.