If you’re looking to maintain the perfect pH balance in your pool or hot tub, look no further than PH Minus Granules. This essential product is designed to help you achieve the optimal pH level of 7.2 – 7.6, ensuring not only bather comfort but also the efficient operation of your pool equipment and the overall health of your pool plants.
With PH Minus Granules, you can say goodbye to water that is too alkaline. If your pool water registers above 7.6 on the pH scale, simply turn to this effective solution to bring it back into the recommended range. By using PH Minus Granules, you can enjoy crystal-clear water that is gentle on the skin and eyes, creating a more enjoyable swimming experience for you and your family.
When it comes to application, PH Minus Granules are easy to use. Start by pre-dissolving the granules in a clean plastic container, following the specified dosing rates. For every 10 liters of warm water, add a maximum of 100g of granules, ensuring thorough mixing until fully dissolved. Once prepared, carefully pour the solution into the pool while the pump is running, ideally near the water inlets for even distribution.
After allowing the product to circulate for at least 8 hours, it’s time to test the pH level again. Depending on the initial reading, you may need to repeat the treatment until the desired pH range is reached. Keep in mind that achieving the perfect pH may require multiple applications, especially for larger pools or hot tubs.
For hot tubs containing 1,000 liters of water, a dosage of 10g of PH Minus Granules is recommended. Larger bodies of water, such as small pools with 40,000 liters or medium pools with 60,000 liters, require 450g and 650g of granules, respectively, for effective pH adjustment.
Don’t let imbalanced pH levels spoil your pool enjoyment. Trust PH Minus Granules to bring your water back to the ideal acidic range, ensuring a safe and pleasant swimming environment for you and your loved ones. Order now and experience the difference that proper pH maintenance can make in your pool or hot tub!
Manufacturers description:
PH minus granules enables you to decrease the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Subject to available stock, heavy orders may be sent as multiples of smaller tubs.
Test the pH of your pool water if it is above 7.6, use pH minus to lower it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water ? add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g