High Quality PH Plus 1Kg PH+ pH Increaser

PH plus granules are your go-to solution for maintaining the optimal pH levels in your pool or hot tub. With the ability to increase the pH to the recommended range of 7.2 – 7.6, these granules ensure bather comfort, enhance chemical efficiency, and safeguard your pool equipment.

When your pool water’s pH falls below 7.2, it’s time to introduce the pH Plus granules to bring it back to the desired level. Maintaining the right pH balance is crucial for enjoying a clean and healthy pool environment.

Application is straightforward with these granules. Begin by pre-dissolving the product in a clean plastic container using a maximum of 100g per 10 Litres of warm water. Stir thoroughly to ensure complete dissolution before adding the solution to the water. It’s recommended to pour the solution with the pump(s) running, ideally near the water inlets for effective distribution.

After a minimum of 8 hours, recheck the pH level and, if necessary, repeat the treatment until the ideal pH is achieved. Depending on the initial pH level, multiple treatments may be required to reach the optimal balance for your pool or hot tub.

For dosing guidance, refer to the following rates based on your water volume:

– Hot tub (1,000 litres/220 Gallons): Add 10g of pH Plus granules

– Small pool (40,000 litres/8,800 Gallons): Add 450g of pH Plus granules

– Medium pool (60,000 litres/13,200 Gallons): Add 650g of pH Plus granules

By using PH plus granules, you not only ensure a pleasant swimming experience but also prolong the lifespan of your pool equipment. Optimal pH levels contribute to efficient chemical usage, reducing maintenance costs in the long run.

Investing in the right pool maintenance products, such as pH Plus granules, is essential for the overall health and longevity of your pool or hot tub. With easy application and effective results, these granules are a must-have for any pool owner looking to enjoy crystal-clear water and a relaxing swim environment.

Manufacturers description:

PH plus granules enables you to increase the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.

Test the pH of your pool water if it is below 7.2, use pH Plus to raise it.

Application Instructions:

1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.

2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.

Dosing rates:

Hot tub: 1,000 litres (220 Gallons) of water – add 10g

Small pool 40,000 litres (8800 Gallons) of water – add 450g

Medium pool 60,000 litres (13200 Gallons) of water – add 650g