High Quality PH Minus 10Kg PH- pH decreaser

PH minus granules are an essential solution for maintaining the perfect pH balance in your pool or hot tub. With the ability to lower the pH level to the ideal range of 7.2 – 7.6, these granules ensure bather comfort, enhance chemical efficiency, and safeguard the equipment of your pool plant.

When your pool water tests above 7.6 on the pH scale, it’s time to introduce the pH minus granules to bring it back into the optimal zone. This not only improves the overall water quality but also prevents any potential issues that may arise from imbalanced pH levels.

Application of the pH minus granules is a straightforward process that guarantees effective results. To begin, pre-dissolve the granules in a clean plastic container using a maximum rate of 100g per 10 Litres of warm water. Thoroughly stir the solution to ensure complete dissolution before carefully adding it to the water while the pump(s) are running. Distributing the solution near the water inlets aids in uniform distribution throughout the pool or hot tub.

After a minimum of 8 hours, it’s recommended to recheck the pH level and repeat the treatment if necessary until the desired pH balance is achieved. Depending on the initial pH reading, multiple treatments may be required to reach the optimal range and maintain it consistently.

The dosing rates for pH minus granules vary based on the volume of water in your pool or hot tub. For a hot tub containing 1,000 litres (220 Gallons) of water, adding 10g of granules is sufficient. Larger pools require higher quantities, with a small pool of 40,000 litres (8800 Gallons) needing 450g and a medium pool of 60,000 litres (13200 Gallons) requiring 650g for effective pH adjustment.

Choosing pH minus granules for pH regulation offers a cost-effective and reliable solution to keep your pool or hot tub water in optimal condition. By maintaining the correct pH level, you not only ensure the comfort and safety of bathers but also extend the lifespan of your pool equipment by preventing corrosion and scale buildup.

Make the smart choice for your pool maintenance routine with pH minus granules, the key to achieving a balanced pH environment that enhances your overall swimming experience. Trust in the effectiveness of this product to deliver consistent results and enjoy a hassle-free way to care for your pool or hot tub.

Manufacturers description:

PH minus granules enables you to decrease the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.

Subject to available stock, heavy orders may be sent as multiples of smaller tubs.

Test the pH of your pool water if it is above 7.6, use pH minus to lower it.

Application Instructions:

1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.

2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.

Dosing rates:

Hot tub: 1,000 litres (220 Gallons) of water – add 10g

Small pool 40,000 litres (8800 Gallons) of water – add 450g

Medium pool 60,000 litres (13200 Gallons) of water – add 650g