500g Relax Pool pH Plus

PH Plus Granules are an essential product for maintaining the perfect pH balance in your pool or hot tub. With the ability to increase the pH level to the recommended range of 7.2 – 7.6, these granules ensure bather comfort, enhance chemical efficiency, and safeguard your pool equipment from damage.

When the pH of your pool water falls below 7.2, it’s time to reach for the PH Plus Granules. Designed for easy application and effective results, these granules are a must-have for pool owners looking to maintain a clean and balanced swimming environment.

To use the PH Plus Granules, simply follow the straightforward application instructions. Start by pre-dissolving the granules in a clean plastic container using the specified dosage rate of 100g per 10 Litres of warm water. Stir the solution thoroughly to ensure complete dissolution before adding it to the pool water with the pump running. This method helps in even distribution throughout the pool, ensuring uniform pH levels.

After a minimum of 8 hours, retest the pH level of the water. If needed, repeat the treatment process until the desired pH range of 7.2 – 7.6 is achieved. Depending on the initial pH level and water volume, multiple treatments may be necessary to reach the optimal balance.

The dosing rates provided make it easy to determine the appropriate amount of PH Plus Granules needed for different water volumes. For a hot tub containing 1,000 litres of water, simply add 10g of granules to achieve the desired pH level. For small pools with 40,000 litres of water, a dosage of 450g is recommended, while medium pools with 60,000 litres of water require 650g of granules for effective pH adjustment.

By using PH Plus Granules, you not only maintain the health and safety of your pool but also ensure a comfortable swimming experience for all users. With its ability to regulate pH levels efficiently and protect pool equipment, this product is a valuable addition to any pool maintenance routine.

Invest in PH Plus Granules today and enjoy the benefits of a perfectly balanced pool environment, where chemical efficiency and bather comfort go hand in hand. Trust in the power of these granules to keep your pool water pristine and your swimming experience enjoyable every time.

Manufacturers description:

PH plus granules enables you to increase the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.

Test the pH of your pool water if it is below 7.2, use pH Plus to raise it.

Application Instructions:

1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.

2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.

Dosing rates:

Hot tub: 1,000 litres (220 Gallons) of water – add 10g

Small pool 40,000 litres (8800 Gallons) of water – add 450g

Medium pool 60,000 litres (13200 Gallons) of water – add 650g