Introducing the Deep Blue Eco pH Plus, a high-quality powdered product designed to ensure your pool water maintains the ideal pH level for a refreshing and safe swimming experience. With the ideal pool pH range set between 7.2 and 7.6, this product is your go-to solution for achieving bather comfort, optimal chemical efficiency, and the protection of your valuable pool plant equipment.
When the pH of your pool water falls below 7.2, it’s time to reach for the Deep Blue Eco pH Plus to swiftly raise it back to the recommended levels. This easy-to-use powder is an essential part of any pool maintenance system, offering a reliable way to keep your pool water in perfect balance.
What sets the Deep Blue Eco pH Plus apart is its exceptional effectiveness in promoting a healthy pool environment. By ensuring that your pool water stays within the recommended pH range, you not only enhance the comfort of swimmers but also improve the overall efficiency of your pool chemicals. Additionally, maintaining the correct pH level helps safeguard your pool equipment from potential damage, prolonging its lifespan.
Application of the Deep Blue Eco pH Plus is a straightforward process that yields significant benefits. Simply pre-dissolve the product in a clean plastic container, following the recommended dosage of 100g per 2.2 gallons (10lts) of warm water. Thoroughly mix the solution to ensure complete dissolution before adding it to the pool while the pump(s) are running. For optimal distribution, it’s advisable to pour the solution near the water inlets.
After a minimum of 8 hours, recheck the pH level of your pool water. If necessary, repeat the treatment until the ideal pH range of 7.2 to 7.6 is achieved. With clear dosage rates provided for different pool volumes, you can easily tailor the application to suit your specific pool size and requirements.
At Deep Blue, we are committed to environmental sustainability, and our Eco pH Plus product reflects this ethos. Packaged in heavy-duty waterproof cardboard, our products minimize plastic waste and contribute to a greener future. Unlike traditional plastic tubs, our innovative packaging reduces the use of plastics by a significant margin, aligning with our goal to combat plastic pollution and reduce our ecological footprint.
Choose Deep Blue Eco pH Plus for a reliable, eco-friendly solution to maintain the optimal pH levels in your pool. With our commitment to quality, performance, and environmental responsibility, you can trust Deep Blue products to deliver exceptional results while caring for the planet.
Manufacturers description:
A powdered product for increasing the pH of pool water, The ideal pool pH level is between 7.2 – 7.6, promoting bather comfort, optimal chemical efficiency and protection of pool plant equipment. Apply when the pH is below 7.2.
More info:
Deep Blue Eco pH Plus Key Features/Characteristics Powder for increasing pH Part of the System Ideal pH range: 7.2 – 7.6 The ideal pool pH levels are between 7.2 – 7.6, promoting bather comfort, optimal chemical efficiency and protection of pool plant equipment. Test the pH of the pool water and if it is below 7.2, use Deep Blue Eco pH Plus to raise it. APPLICATION INSTRUCTIONS 1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10lts) of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the pool whilst the pump(s) are turned “on”, preferably near to the water inlets to aid distribution. 2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Litres 4,545 9,090 22,500 45,450 68,175 Dose rates Gallons 1,000 2,000 5,000 10,000 15,000 Dose rate 50g 100g 250g 500g 750g Please note a number of treatments may be required.
Our Deep Blue Ecoducts are specifically packaged to help reduce damage to the environment and the creation of waste products. They are supplied in heavy-duty waterproof cardboard packaging to save using the common plastic tubs. While we are still improving the processes for our waterproof packaging, currently they create just 3% of the plastics used in the standard white Polyethylene buckets. The items are secure in transit, secure in damp/humid storage locations and don’t contribute as greatly to the 460 million tons of plastic waste expected each year by 2030.