PH minus granules are an essential product for pool and hot tub owners looking to maintain the perfect pH level in their water. By enabling you to decrease the pH to the ideal range of 7.2 – 7.6, these granules offer a host of benefits including enhanced bather comfort, improved chemical efficiency, and increased protection for your pool equipment.
When the pH of your pool water rises above 7.6, it’s time to reach for the pH minus to bring it back down to the recommended levels. This simple yet effective solution can make a significant difference in the overall quality of your pool or hot tub water.
To ensure proper application, follow these easy instructions:
1. Pre-dissolve the granules in a clean plastic container using a maximum rate of 100g per 10 Litres of warm water. Stir the solution thoroughly to ensure complete dissolution. Add the solution to the water with the pump(s) running, preferably near the water inlets for even distribution.
2. Allow a minimum of 8 hours for the pH adjustment to take effect. Recheck the pH level and repeat the treatment if necessary until the desired pH range is achieved. Multiple treatments may be needed, depending on the initial pH level.
For dosing rates based on water volume:
– Hot tub (1,000 litres): Add 10g of pH minus granules
– Small pool (40,000 litres): Add 450g of pH minus granules
– Medium pool (60,000 litres): Add 650g of pH minus granules
With the convenience and effectiveness of PH minus granules, maintaining the optimal pH level in your pool or hot tub is easier than ever. Don’t let imbalanced pH levels disrupt your aquatic oasis; keep your water clean, clear, and inviting with this essential product.
Investing in PH minus granules not only ensures a more enjoyable swimming experience for you and your guests but also prolongs the life of your pool equipment by preventing corrosive damage. Say goodbye to pH-related issues and hello to a well-balanced pool environment that you can enjoy with peace of mind.
Manufacturers description:
PH minus granules enables you to decrease the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Test the pH of your pool water if it is above 7.6, use pH minus to lower it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water ? add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g