Deep Blue Pro PH Plus 5Kg PH+ pH Increaser

Ensure your pool or hot tub maintains the perfect pH balance with our PH Plus Granules. Designed to elevate the pH level to the recommended range of 7.2 – 7.6, this product not only enhances bather comfort but also optimizes chemical efficiency and safeguards your pool equipment.

When it comes to pool maintenance, precision is key. If your pool water’s pH falls below 7.2, it’s time to take action. Our PH Plus Granules offer a reliable solution to address this issue efficiently and effectively.

Applying the PH Plus Granules is a straightforward process that can make a significant difference in your pool’s overall performance. To begin, pre-dissolve the granules in a clean plastic container, ensuring a maximum rate of 100g per 10 liters of warm water. Thoroughly mix the solution to achieve complete dissolution before carefully adding it to the water while the pump is running. For optimal distribution, consider adding the solution near the water inlets.

After a minimum of 8 hours, reevaluate the pH level of the water. If necessary, repeat the treatment until the ideal pH range is achieved. Depending on the initial conditions, multiple treatments may be required to reach the desired balance.

Our dosing recommendations cater to different water volumes, ensuring precise and effective treatment for pools and hot tubs of varying sizes. For a hot tub containing 1,000 liters (220 gallons) of water, add 10g of PH Plus Granules. Larger pools require proportionally higher dosages: for a small pool with 40,000 liters (8,800 gallons) of water, add 450g, while a medium-sized pool with 60,000 liters (13,200 gallons) of water should receive 650g of granules.

Don’t let imbalanced pH levels disrupt your pool experience. Trust our PH Plus Granules to maintain an optimal environment for relaxation and enjoyment. With these granules at your disposal, you can ensure that your pool or hot tub remains a source of refreshment and rejuvenation for all who use it.

Manufacturers description:

PH plus granules enables you to increase the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.

Subject to available stock, heavy orders may be sent as multiples of smaller tubs.

Test the pH of your pool water if it is below 7.2, use pH Plus to raise it.

Application Instructions:

1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.

2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.

Dosing rates:

Hot tub: 1,000 litres (220 Gallons) of water – add 10g

Small pool 40,000 litres (8800 Gallons) of water – add 450g

Medium pool 60,000 litres (13200 Gallons) of water – add 650g