Plastica 5kg Relax pH Plus

Ensure the perfect pH balance of your pool or hot tub with PH Plus granules, designed to elevate the pH level to the recommended range of 7.2 to 7.6. Maintaining this optimal pH range not only enhances bather comfort but also improves the efficiency of your pool chemicals while safeguarding your pool equipment from corrosion.

When your pool water’s pH falls below 7.2, it’s time to introduce PH Plus to bring it back to the desired level. Easy to use and effective, these granules are a must-have for any pool or hot tub owner looking to create a pristine swimming environment.

With our convenient packaging, you can expect your order to be efficiently fulfilled, with larger quantities being provided in multiple smaller tubs for your convenience. Say goodbye to pH worries and hello to crystal-clear water with our reliable PH Plus solution.

For application, simply follow these straightforward instructions to achieve the perfect pH balance:

1. Begin by pre-dissolving the granules in a clean plastic container, using a maximum of 100g of product per 10 litres of warm water. Stir thoroughly to ensure complete dissolution before carefully adding the solution to your pool water while the pump is running, ideally near the water inlets for even distribution.

2. Allow a minimum of 8 hours for the product to take effect before retesting the pH level. If necessary, repeat the treatment until the ideal pH range is achieved. Depending on your initial water conditions, multiple treatments may be required to reach the desired balance.

For precise dosing, refer to the following recommendations based on your water volume:

– Hot tub (1,000 litres): Add 10g of PH Plus granules

– Small pool (40,000 litres): Add 450g of PH Plus granules

– Medium pool (60,000 litres): Add 650g of PH Plus granules

Experience the convenience and effectiveness of PH Plus granules as you take control of your pool or hot tub’s pH levels with ease. Trust in our product to deliver consistent results, ensuring your water remains balanced and inviting for all swimmers.

Don’t let pH imbalances disrupt your pool enjoyment – invest in PH Plus granules today and enjoy a beautifully balanced swimming environment every time you take a dip. Say goodbye to pH worries and hello to a perfectly maintained pool or hot tub with our reliable and effective solution.

Manufacturers description:

PH plus granules enables you to increase the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.

Subject to available stock, heavy orders may be sent as multiples of smaller tubs.

Test the pH of your pool water if it is below 7.2, use pH Plus to raise it.

Application Instructions:

1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.

2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.

Dosing rates:

Hot tub: 1,000 litres (220 Gallons) of water – add 10g

Small pool 40,000 litres (8800 Gallons) of water – add 450g

Medium pool 60,000 litres (13200 Gallons) of water – add 650g