These chlorine granules are one of the most popular products for ensuring pool and spa water is safe and bacteria free.
Apply regularly to achieve the recommended free chlorine level of 3-5 mg/l (ppm) for hot tubs or 1-3 mg/l (ppm) for swimming pools. These granules are rapid dissolving, long lasting and have little effect on the pH of the water.? They are suitable for shock dosing small above ground pools.? You can find dosing amounts below.
Key Features
Granular chlorine has little effect on the pH level of the water. These stabilised chlorine granules are ideal for regular dosing of your swimming pool or spa, to produce free active chlorine which kills bacteria and other potentially harmful organisms.
Application Instructions
1. Maintain pH level within the ideal range of 7.2 ? 7.6. If outside this range please use our PH plus or PH minus products to adjust for the best results.
2. Maintain free chlorine residuals for spas within the range 3 ? 5mg/l (ppm).? For swimming pools it should be 1 – 3mg/l (ppm). Freshly filled spas require an initial shock or start up dose of chlorine: 50mg/l (ppm) for 1 hour or 20mg/l (ppm) for 2 hours.
3. This product may be applied directly to pools or spas where temperatures exceed 20? degrees C. If below this temperature or in doubt it is recommended to pre-dissolve in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1ltr) in water. Stir well to ensure product is fully dissolved. Add the resulting solution to the spa or pool whilst the pumps are turned ?on?.
4. Repeat dose application if necessary to achieve the required levels.
5. It is recommended that you periodically (e.g. weekly or after heavy spa use) shock dose your spa to eliminate any excess contamination.
Dose Rates
Medium hot tub 1,000 litre (220 Gallons) of water requires 2g to increase the chlorine level by 1mg/l (ppm) or 6g to increase chlorine level by 3mg/l(ppm)
Large hot tub 1,500 litre (330 Gallons) of water requires 3g to increase the chlorine level by 1mg/l (ppm) or 9g to increase chlorine level by 3mg/l(ppm)
Small pool 40,000 litres of water requires 80g to increase the chlorine level by 1mg/l (ppm) or 240g to increase chlorine level by 3mg/l(ppm)
Medium pool 60,000 litres of water requires 120g to increase the chlorine level by 1mg/l (ppm) or 360g to increase chlorine level by 3mg/l(ppm)
Large pool 80,000 litres of water requires 160g to increase the chlorine level by 1mg/l (ppm) or 480g to increase chlorine level by 3mg/l(ppm)
Karen Mackay (verified owner) –
This product has worked brilliantly in the pool.The girls have enjoyed swimming in crystal clear waters in the revdnt heatwave.
Paul & Vicky Weller (verified owner) –
Im pleased with the granules do what there suppose to do wish i had ordered the testing sticks otherwise its guess work. bought with the floater other wise granules can bleach the plastic if left to dissolve on the bottom.
Dee Lacey –
Does what it is supposed to do. Quick delivery and value for money
Berryheadchocolate (verified owner) –
Bought these to stop the water in our large circular paddling pool from going green. Only need a very small portion of granules for each dose, dissolved in hot water, so this tub should last ages. Just the job.
T. Jackson (verified owner) –
Old style bottle was far betterThis one is difficult to open and spills
Philip Hitchen –
Good product
Jennifoo –
Works well I assume. The Test Strips indicated as such. Dont breath it in by accident by the way. Not very plesent.
Mr. Nicholas Wright (verified owner) –
Quite expensive for the qty, but easy to use
Philip Hitchen (verified owner) –
Good product
joy morley –
Bought these as an easy way to keep control of the chlorine level in our above ground pool. As we dont have a pool heater the water is generally on the cold side which meant that they didnt dissolve which was very disappointing. If I had known this I wouldnt have purchased them. Easy to use though